KLIN Fiberglass A

Very flexible extraction hose made of fiberglass fabric covered with aluminum, reinforced with a galvanized steel external spiral, with very good thermal resistance, used in extraction and ventilation systems to remove air, hot gases, welding fumes and dust.

Characteristics

Category:

KLIN hoses

Diameter:

50 – 1150 mm

For the transport of media:

Application:

work at elevated temperatures
in ventilation systems
for exhaust gas extraction
for extracting hot gases

Also check:

Chemical resistance table

	temperature resistance	to +230°C
	axially compressible	1:6
	flexibility	*****
	UV resistant
	standard lengths	5 m, 10 m

Profile

Download

Product-catalog.pdf

Deklaracja-zgodnosci-Klin-Plotno-szklane.pdf

Information-sheet-industrial-hoses.pdf

Technical parameters

Product catalog	Inner diameter [mm]	Outer diameter [mm]	Bending radius [mm]	Approx. weight [kg/m]	Vacuum [bar]
3 – 02 – 0050	50	62	32	0,4	-0,20
3 – 02 – 0060	60	72	38	0,4	-0,20
3 – 02 – 0065	65	77	41	0,4	-0,18
3 – 02 – 0070	70	82	44	0,4	-0,15
3 – 02 – 0075	75	87	47	0,4	-0,12
3 – 02 – 0080	80	92	50	0,5	-0,11
3 – 02 – 0090	90	102	57	0,5	-0,10
3 – 02 – 0100	100	112	63	0,6	-0,08
3 – 02 – 0110	110	122	69	0,6	-0,06
3 – 02 – 0115	115	127	73	0,7	-0,05
3 – 02 – 0120	120	132	76	0,7	-0,05
3 – 02 – 0125	125	137	79	0,7	-0,04
3 – 02 – 0130	130	142	82	0,8	-0,04
3 – 02 – 0140	140	152	88	0,8	-0,04
3 – 02 – 0150	150	162	95	0,9	-0,03
3 – 02 – 0160	160	172	101	1,0	-0,03
3 – 02 – 0165	165	177	104	1,0	-0,03
3 – 02 – 0175	175	187	109	1,1	-0,03
3 – 02 – 0180	180	192	113	1,1	-0,03
3 – 02 – 0190	190	202	120	1,2	-0,02
3 – 02 – 0200	200	212	126	1,3	-0,02
3 – 02 – 0225	225	237	142	1,4	-0,02
3 – 02 – 0230	230	242	145	1,5	-0,02
3 – 02 – 0250	250	262	158	1,6	-0,01
3 – 02 – 0280	280	292	177	1,7	-0,01
3 – 02 – 0300	300	312	189	1,8	-0,01
3 – 02 – 0315	315	327	199	1,9	-0,01
3 – 02 – 0320	320	332	202	1,9	-0,01
3 – 02 – 0350	350	362	221	2,0	-0,01
3 – 02 – 0355	355	367	224	2,0	-0,01
3 – 02 – 0400	400	412	252	2,2	-0,005
3 – 02 – 0450	450	462	284	2,5	-0,005
3 – 02 – 0470	470	482	296	2,7	-0,005
3 – 02 – 0500	500	512	315	2,8	-0,005
3 – 02 – 0560	560	572	352	3,0	-0,005
3 – 02 – 0600	600	612	378	3,1	-0,005
3 – 02 – 0700	700	712	441	3,6	-0,001
3 – 02 – 0800	800	812	504	4,1	-0,001
3 – 02 – 0900	900	912	567	4,8	-0,001
3 – 02 – 1000	1 000	1012	630	5,3	-0,001
3 – 02 – 1100	1 100	1112	693	5,9	-0,001
3 – 02 – 1150	1 150	1162	725	6,2	-0,001

Tolerance for the parameters contained in this catalog is about 5%. All parameters apply for room temperature. To discharge static electricity, ground the spiral. The aluminum layer is standardly placed on the outside of the hose, it is possible to make the hose with the aluminum layer on the inside of the hose for a special request. It is possible to make a hose with a non‑standard diameter (not included in the basic offer) on a special request. It is possible to make a KLIN hose whether with galvanized spiral or stainless steel spiral for a special request. The standard lengths of the hoses are measured while maximum extension.

KLIN Fiberglass A

Characteristics

Profile

Download

Technical parameters

See also other products from this category

Shortcuts

Download catalog

Contact