PVC Asen

Thick‑walled hose made of softened polyvinyl chloride reinforced with a steel spiral with very good chemical resistance and smoothed inner wall, used for pneumatic and gravitational transport of solid media, liquids and gases, including dirty water, sludge, faeces, aqueous solutions, suspensions, e.g. in waste removal vehicles or sewage treatment plants.

Characteristics

Category:

PVC hoses

Diameter:

75 – 400 mm

For the transport of media:

solids
liquids
gas

Application:

transport of loose materials
transmission of hydrolysis media
in ventilation systems
to extract chemical vapors
for the transport of granules
for applications with the required resistance to hydrolysis and microbes
for transporting water

Also check:

Chemical resistance table

	chemically resistant
	resistant to hydrolysis
	flexibility	**
	smoothed inner wall
	pressure and vacuum resistant
	temperature resistance	-5 to +70°C
	standard lengths	5 m, 10 m, 20 m

Profile

Download

Product-catalog.pdf

Deklaracja-zgodnosci-PVC.pdf

Information-sheet-industrial-hoses.pdf

Technical parameters

Product catalog	Inner diameter [mm]	Outer diameter [mm]	Bending radius [mm]	Approx. weight [kg/m]	Pressure [bar]	Vacuum [bar]
2 – 07 – 0075	75	85	330	1,8	2,3	-0,90
2 – 07 – 0082	82	92	440	2,0	2,1	-0,90
2 – 07 – 0090	90	100	460	2,2	2,0	-0,90
2 – 07 – 0100	100	110	490	2,3	1,8	-0,90
2 – 07 – 0110	110	120	660	2,5	1,7	-0,90
2 – 07 – 0115	115	125	680	2,6	1,6	-0,85
2 – 07 – 0120	120	130	700	2,7	1,6	-0,85
2 – 07 – 0125	125	135	730	2,9	1,5	-0,80
2 – 07 – 0127	127	137	790	2,9	1,5	-0,70
2 – 07 – 0130	130	140	830	3,0	1,4	-0,60
2 – 07 – 0135	135	145	840	3,1	1,4	-0,60
2 – 07 – 0140	140	150	860	3,2	1,3	-0,60
2 – 07 – 0150	150	160	890	3,4	1,5	-0,80
2 – 07 – 0160	160	170	950	4,1	1,4	-0,80
2 – 07 – 0170	170	180	980	4,4	1,3	-0,70
2 – 07 – 0180	180	190	1120	4,8	1,3	-0,60
2 – 07 – 0190	190	200	1190	5,1	1,2	-0,50
2 – 07 – 0200	200	210	1250	5,5	1,1	-0,50
2 – 07 – 0210	210	220	1470	5,8	1,0	-0,40
2 – 07 – 0220	220	230	1760	6,1	1,0	-0,40
2 – 07 – 0240	240	250	1920	6,4	0,8	-0,35
2 – 07 – 0250	250	260	2000	6,6	0,8	-0,35
2 – 07 – 0280	280	290	2520	6,9	0,7	-0,35
2 – 07 – 0300	300	310	2700	7,3	0,7	-0,35
2 – 07 – 0315	315	325	2835	7,5	0,7	-0,35
2 – 07 – 0350	350	360	3500	8,2	0,6	-0,35
2 – 07 – 0400	400	410	4000	8,8	0,5	-0,35

Tolerance for the parameters contained in this catalog is about 5%. All parameters apply for room temperature. To discharge static electricity, ground the spiral. The flow direction of the medium is marked on the hose with an arrow. It is possible to make a hose with a non‑standard diameter (not included in the basic offer) and make hoses in color and with a print on a special request. The standard lengths of the hoses are measured while maximum extension.

PVC Asen

Characteristics

Profile

Download

Technical parameters

See also other products from this category

Shortcuts

Download catalog

Contact